10318协和式飞机灯光安装教程

10318 Concorde light installation tutorial

灯光材料如下

拿出灯光，将第一节灯条安装如下

Lighting materials are as follows

Take out the light and install the first light strip as follows

将红圈内的积木拆起

拿出配件把单独的一节导线的灯粒安装如下

Remove the blocks in the red circle

Take out the fittings and install the lamp particles of the separate

wire as follows

并将拆起的积木安装还原

拿出箭头所指的导线【2颗灯粒】

And remove the building blocks installed and restored

Take out the lead pointed by the arrow [2 light particles]

穿到飞机尾部如图

拿出配件，将灯粒放配件内安装如下

To the tail of the plane

Take out the accessory, put the lamp particle into the accessory

and install as follows

将剩下的灯光导线延箭头方向穿过

将接下来的一节灯条安装如下

Run the remaining light wires through the arrow

Install the next light strip as follows

相同方式将侧边积木拆起

Remove the side blocks in the same way

拿出配件，把单独一节导线的灯粒安装如下

拿出箭头所指的导线【两颗灯粒】

Take out the fittings and install the lamp particles of a separate

wire as follows

Take out the lead pointed by the arrow [two light grains]

把导线拉到飞机后部

拿出配件将灯粒放配件内安装如下

Pull the wire to the back of the plane

Take out the fittings and put the lamp granules into the fittings

for installation as follows

拿出最后一节导线

将如图的积木拆起

Take out the last piece of wire

Remove the blocks shown in the picture

飞机头部的位置也拆起

The nose of the plane was also removed

拿最后一节灯条安装如下

Take the last light strip and install it as follows

把多余导线如图拉到积木位置固定在积木内

Pull the excess wire to the block position as shown and fix it in

the block

积木安装还原

Building block installation and restoration

最后将灯光插头连接如下

Finally connect the light plug as follows

电池充电

battery charge