大众T2遥控灯光安装教程

Vw T2 remote control light installation tutorial

灯光材料如图

来到车尾，将红色和橙色配件拆起

Lighting material as shown in figure

Go to the back of the car and remove the red and orange parts

拿出A包，将第一个红灯放配件内安装如图

Take out bag A and put the first red light in the fittings as shown in the figure

相同方式安装接下来的灯光如图

将插头导线穿到车身

Install the following lights in the same way as shown in the figure

Thread the plug wire to the body

拿出B包，将灯条安装在车身两侧上

Take out Bag B and install the light strips on both sides of the body

拿出C包，将灯条贴于车子底部如图

Take out package C and stick the light strip on the bottom of the car

as shown in the picture

拿出D包，将灯组安装在车头处如图

拿出E包。将零件拆起

Take out the D package and install the light set at the front as

shown in the picture

Take out Package E. Remove the parts

将灯光安装如图

1

2

Install the lights as shown

将积木拆起,安装另一侧灯光如下

并将积木还原,把箭头所指积木拆起

Remove the block and install the light on the other side as follows

And restore the block, remove the block pointed by the arrow

将导线藏于积木内如下

将插头导线延车底穿过到车头

Hide the wire in the blocks as follows

Run the plug wire under the car to the front

将导线拉到车身

将所有插头插到连接板中

Pull the wire to the body

Insert all plugs into the connecting plate

电池充电

battery charge